BOUCHE LABS

MODELS 2123, 2124, 2125 CHARGE AMPLIFIERS

& MODEL 4121 POWER SUPPLY

The Model 2123, 2124, 2125 Charge Amplifiers and 4121 Power Supply are low-priced. The small overall dimensions, dc-power supply or battery operation, are appropriate for use in the test laboratory or in the field.

The Models 2123, 2124 & 2125 Charge Amplifiers are supplied with +15 Vdc and -15 Vdc from the Bouche Labs Model 4121 ac-operated power supply. The Model 4121 power supply is capable of powering up to twenty Model 2120 series Bouche Labs charge amplifiers.

  General Description
  BOUCHE LABS Model 2123 Solid State Dual Fixed Gain Charge Amplifier has outputs of 10 and 100 mV/pC, is used with piezoelectric transducers such as accelerometers and force gages for general vibration work.
   
  BOUCHE LABS Model 2124 Solid State Dual Fixed Gain Charge Amplifier has outputs of 0.1 and 1.0 mV/pC, is used with high-output piezoelectric transducers or for shock tests with general purpose accelerometers.
   
  BOUCHE LABS Model 2125 Solid State Dual Fixed Gain Charge Amplifier has its amplifier gain adjusted to the sensitivity of the piezoelectric transducer. The system sensitivities are customer-selected. For example, commonly selected outputs are 10 and 100 mV/g for general vibration work and outputs of 0.1 and 1.0 mV/g are used for accelerometers used in shock tests.

SPECIFICATIONS

INPUT    
  MODE   Single-ended
  GROUND (Insulated from case) ohms
10M
TRANSFER CHARACTERISTICS    
  AMPLIFIER OUTPUTS    
    Model 2123 mV/pC 10 and 100
    Model 2124 mV/pC 0.1 and 1.0
  AMPLIFIER GAINS    
    Model 2125 mV/g Customer Selected
  ACCURACY    
    Model 2123 Outputs % +/-1
    Model 2124 Outputs % +/-1
    Model 2125 Gains % +/-1
  FREQUENCY RANGE,10-10,000 Hz % +/-1
  AMPLITUDE LINEARITY (ref:best straight line) % +/-0.2
  WARM-UP TIME min 1
  RESIDUAL NOISE (referred to input) pC 0.3 (rms)
POWER REQUIREMENTS    
  SUPPLY VOLTAGE Vdc +15/-15, typical limits +14/-14 to +18/-18
  SUPPLY CURRENT mA 7.5, typical, 9.5 maximum, at +15/-15 Vdc
PHYSICAL    
  OVERALL DIMENSIONS in/cm 1.75 x 4.5 x 6.25/4.4 x 11.4 x 15.9
  FINISH   Anodized Aluminum
  WEIGHT lb 2
  CONNECTORS    
    Input   10-32 Microdot S-50 or equivalent
    Outputs   Two BNC, UG-1094/U or equivalent
ENVIRONMENTAL    
  OPERATING TEMPERATURE oF/oC +40 to +125/+5 to +52
  STORAGE TEMPERATURE oF/oC -65 to +185/-54 to +85
  RELATIVE HUMIDITY, maximum % 95
ACCESSORIES SUPPLIED    
  Instruction manual, and mating connector for supply voltages.    
CALIBRATION SUPPLIED    
  Models 2123 and 2124: Bouche Labs Charge Amplifier Calibration Service No. 11.    
  Model 2125: Bouche Labs Accelerometer Calibration Service No. 7 with Bouche Labs or customer accelerometer calibrated as a system.    

Bouche Laboratories reserves the right to change these specifications without notice.

BOUCHE LABS, 720 North Ventura Road, Ste. 4, Port Hueneme, CA 93041

(805) 271-1000, Fax (805) 271-1001